1. Welcome to CowboysZone!  Join us!  Come on!  You know you want to!

Auto repair question...

Discussion in 'Off-topic Zone' started by Achilleslastand, Apr 15, 2011.

  1. Achilleslastand

    Achilleslastand Well-Known Member

    1,395 Messages
    245 Likes Received
    I was replacing a belt on my hyundai tiburon and theres small plastic outlet on the top of the radiator that is connected by a hose to the radiator overflow.
    While trying to get enough tension on the alt belt i accidentally snapped this piece off.
    Im not replacing the radiator just for this but im thinking JB weld would do the job.
    Does anyone know of anything stronger?
  2. 63echo

    63echo Member

    279 Messages
    0 Likes Received
    I carry a tube of QuikSteel on my bike and in my truck. It's pretty good and a bit more convenient than JB Weld, though it stinks to high heaven. Either would work on your outlet tube, though.
  3. jimmy40

    jimmy40 Well-Known Member

    15,207 Messages
    315 Likes Received
    trade it in.
  4. 67CowboysFan

    67CowboysFan New Member

    2,345 Messages
    0 Likes Received
    JB Weld should work. Make sure to clean the break with something like acetone to get rid of any oily film from anti freeze.
  5. Achilleslastand

    Achilleslastand Well-Known Member

    1,395 Messages
    245 Likes Received
    Its not a Ford.......
    I let the jbweld cure for about 16 hours before i drove it and it seems to have fixed it....least for now.
  6. CliffnMesquite

    CliffnMesquite Well-Known Member

    4,320 Messages
    163 Likes Received
    Hyundai Tiburon?

    Just keep opening cerial box's till you find a new one.
    ;)
  7. Route 66

    Route 66 Active Member

    3,310 Messages
    6 Likes Received
    Buy a Challenger-it'll make you giggle.
  8. Achilleslastand

    Achilleslastand Well-Known Member

    1,395 Messages
    245 Likes Received
    Haha....nice one

Share This Page