JBond;4577389 said:
I managed to get expandable foam insulation all over my hands. Quite the mess. Going into my top 10 of stupid things I have done. I tried acetone and several other fixes. Got a lot off, but my hands look shiny and the skin is cracking. I still cannot get the final layer off. It hurts like a *****. My hands are a complete mess. Bleeding and very swollen. I know there are some tremendous minds here at the zone. I hope someone has an idea.
I need some help. Thank you to anyone that responds.
...your hands are cracked is because you used acetone.
In the last industrial facility I managed the employees used to wash their hands in acetone daily as a standard procedure for getting plastic resin off.
I stopped that immediately. Acetone has a tendency to breakdown fats and oils. Basically you stripped all of the oils out of your epidermal layer. In the case of my plant workers when I took over everyone of them had dried withered cracked hands. Their hands look terrible.
Why is your skin shiny?
I'm suspecting some form of hydroxide based chemical. Basically you must have scrubbed your hands with some form of alkaline cleaner or acid based cleaner.
Did you use oven cleaner? The shiny hands means you have basically burned off the top epidermal layer of your skin. Typically we have a profile to our skin. With the combination of the acetone to dry your hands out and the other chemical burning off the profile you probably don't have any fingerprints and have been left with a tight stretched out residual skin layer that is possibly very sensitive now.
Rest your hands. Be careful with bag balm, butt balm or any other ointments. Try a small bit on your hands first before your slather it all on. Take it easy and like others said use gloves next time.